Application Guides

Heat Transfer Vinyl 

HTV application is very simple to apply with a standard iron. 

Iron the garmet area where you are adding your HTV design

Add the logo to your garment, cover the logo using a thin tea towel or teflon sheet.

Then with a hot iron press down with a good amount of pressure!. over your logo for 10 - 16 seconds. Then slowly peel back the plastic cover from your logo, make sure it looks good. Check your logo has been applied and your all done. If the logo is not applied to your garmet repeat for a further 5 seconds. 

Your all done!. 

Aftercare - Once you have applied your HTV design do not wash your garment for 24/48 hours. When washing wash on a cool wash, hang to dry. This will ensure you have a long lasting high quality logo.